Cold applied PP fiber woven tape for weld joints bends fittings
- Packaging:
- Packing in carton
- Productivity:
- 300 MTS/month
- Brand:
- XUNDA
- Transportation:
- Ocean,Land,Air
- Place of Origin:
- China
- Supply Ability:
- 50000MTS/year
- Certificate:
- ISO9001,SGS
Basic Info
Model No.: T500
Product Description
Cold applied PP fiber woven tape for weld joints bends fittings ( T500)
1. System description:
The XUNDA-T 500 series is cold applied tape for both metallic pipelines and waterproofing works against outdoor bad weathers .
The PP fiber woven tape shall be applied after the Liquid adhesive by hand or with a wrapping machine.
Waterproofing- | Pipelines protection |
-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course. -Tough, high performance waterproof membrane for critical substructures and civil engineering works. -Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts. -Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt | _ Weld joints _ Bends _ Fittings _ Bare pipe lengths _ Pipe rehab and repair -Bare pipe length
|
2. Structures
The specification of the tape consists of three layers,
Adhesive layer: Butyl rubber Bituminous Compound
Backing : PP woven fabric cloth
Interleaf: Antiadhesive Film Treated with Silicone
3. Features
Waterproofing- | Pipes protection |
-Cold applied. -High resistance to bad weather environment -Good performance itself to keep dry -Easily application &installation. -Suitable for a wide range of temperatures - Compatible primers -Safe,clean | _ Cold applied _ Excellent self adhesion to pipe _ Flexibility provides extra protection at vulnerable areas _ Excellent conformability and consistent uniform thickness _ Easily applied with no special equipment _ Compatible with common pipe coatings _ Excellent resistance to cathodicdisbonding _Wider service temperature range
|
4. Physical Properties
Polypropylene Mesh Membrane Tapes XUNDA-T 500 Series
Item | T 5100 | T 5130 | T 5150 | T 5165 | |
Total thickness (mil) | 40mils | 50mils | 60mils | 65mils | |
Tensile Strength (lb/in) | 30(5kg/cm) | 35(6.3kg/cm) | 39(7kg/cm) | 42(7.5kg/cm) | |
Elongation (%) | 400 | 400 | 450 | 500 | |
Length | 25mtrs | 20mtrs | 15mtrs | 10mtrs | |
Width | 2[,4",6",9" | ||||
Peeladhesion To primed pipe (oz/in) | 269(3kg/cm) | 296(3.3kg/cm) | 314 (3.5kg/cm) | 340(3.8kg/cm) | |
To backing (oz/in) | 90(1kg/cm) | 90(1kg/cm) | 117(1.3kg/cm) | 135(1.5kg/cm) | |
Dielectric Strength (KV/mm) | 42 | 42.6 | 43 | 43.8 | |
Volume Resistivity (ohm·m) | 2.5 X 1012 | 2.5 X 1012 | 2.5 X 1012 | 2.5 X 1012 | |
Water Vapor Transmission Rate (g/ m2/24h) | 0.06 | 0.05 | 0.03 | 0.02 | |
Water Absorptivity (%) | 0.1 | 0.1 | 0.1 | 0.1 | |
Application Temperature (°F) | -31-+160 (-35-+70℃) | ||||
Max service temperature (°F) | -40-+250 (-40-+121℃) |
Product Categories : Anticorrosion Pipe Wrap Tape > PP Woven Fiber Wrap Tape